Garage Door Problems:
Are you facing some issues with your garage doors time after time? It may be due to the normal wear and tear or the deterioration of the garage doors over time. Luckily, modern garage doors are better equipped with technology to deal with common problems.
For instance, if your sensors are not aligned or dirty, you might face difficulties opening and closing the doors. Nevertheless, you can check the garage doors for minor problems and quickly fix them without hassle.
Regular maintenance can help you with preventing fundamental problems garage door problems. So, to help you out, we’ll discuss common garage door problems and how to prevent them in this article.
Some Common Ones and How You Can Resolve Them
You might notice some weird noises or even rumble on its way down. These sounds can probably be due to typical mechanical issues that need proper lubrication or replacement. If you notice any weird sounds or problems with your garage door, it could be due to the following reasons.
Broken Sensors or Cables
One of the most common issues with garage doors is possibly faulty sensors or cables. The garage door might start operating unusually, like, not responding to the remote-control commands. It can be frustrating, but cleaning sensors regularly is the best way to avoid this issue.
Also, the misalignment of the garage door is a possible reason for the issues with your garage door. These eye sensors act as a safety measure to ensure that the garage door doesn’t close on people or objects, such as cars.
So, if the sensor is not working or aligned, it will stay in the open position. Additionally, broken cables can also be a reason that the garage door doesn’t close. It will cause the door to remain open. Either way, you should check for any faulty sensors or cables.
Garage Door Malfunctioning Halfway Through
The opening and closing of garage doors unevenly is also a common problem that homeowners face. You might notice that the garage door will not go up or down completely. This might be because the limits are off, so you must go through the garage door manual and adjust them accordingly.
You can also check if there is anything that is blocking the tracks. Since the track and rollers are subject to deterioration due to damage and rust over time, you should also look at them. Clean the tracks properly to ensure no debris or other dirt is blocking the way.
If your garage door continues to open unevenly after cleaning the tracks, there could be an issue with the spring system. In such situations, it is better to call an expert so they can resolve the problem with the spring system.
The springs support your garage door’s weight to ensure it moves steadily upon the open and close commands. Therefore, they are under constant pressure and could be subject to damage.
They will become weaker or can even break in two. So, you need an expert to inspect your garage door springs. Avoid doing it on your own since it requires special training and tools to repair or replace the springs.
Issues with Operator/Motor
If you have been neglecting your operator/motor maintenance services, you might face issues with the door. As we mentioned earlier, taking proper care of your garage door will allow you to resolve most of the fundamental problems.
So, if the doors are not lubricated for a long time, they will start to malfunction. Ideally, you should lubricate your operator/motor once or twice a year. In addition to the motor, you should also lubricate the chain and belt drives along with the screw operator rails.
Rattling or Clanking Noises
Check the system’s nuts and bolts to see if the door is making rattling or clanking noises during the movement. The loose bolts can be a significant reason behind the rattling noise, indicating that the door might collapse if you linger it on for too long.
Feel free to contact us for help! Heritage Door